Where to order
epeas_RF_energy_harvesting_AEM30940 Where to order
Top specs
  • Vin 50 mV to 5 V
  • Cold start 3 μW @ 380 mV
  • Pin 3 μW to 550 mW
  • Pout 20 mA @ 1.2/1.8 V and 80 mA @ 1.8-4.1 V
  • MPPT Yes
  • Package QFN28
    5 x 5 mm

Ultra-low-power start-up:

  • Cold start from -19 dBm to 10dBm

Ultra-low-power boost regulator:

  • Open-circuit voltage sensing for MPPT every 0.33 s
  • Configurable MPPT with 2-pin programming
  • Selectable Voc ratios of 50, 65 or 80%
  • Input voltage operation range from 50 mV to 5 V
  • MPPT voltage operation range from 50 mV to 5 V
  • Constant impedance Matching (ZMPPT)

Integrated 1.2/1.8 V LDO regulator:

  • Up to 20 mA load current
  • Power gated dynamically by external control
  • Selectable output voltage

Integrated 1.8 V-4.1 V LDO regulator:

  • Up to 80 mA load current with 300 mV drop-out
  • Power gated dynamically by external control
  • Selectable or adjustable output voltage

Flexible energy storage management:

  • Selectable overcharge and overdischarge protection
  • For any type of rechargeable battery or (super)capacitor
  • Fast supercapacitor charging
  • Warns the load when the battery is running low
  • Warns when output voltage regulators are available

Smallest footprint, smallest BOM:

  • Only seven passive external components

Optional primary battery:

  • Automatically switches to the primary the battery when the secondary battery is exhausted

Integrated balun for dual-cell supercapacitor

AEM30940-vibration-energy-harvesting-diagram-epeas-AC

AEM30940 Datasheet Download
AEM30940 Product Brief Download
Configuration Tool Download
ALTIUM and EAGLE files about the AEM30940 / Simplified schematic and BOM Download
Where to order
Evaluation board (79 x 46 mm) includes the AEM30940 QFN28, its 7 passive components and jumpers used to easily configure the AEM. A diode bridge is available if the source is an AC input signal. Jumpers are used to define the MPPT ratio recommended for the harvester and the protection levels recommended for the storage element. Additional jumpers and resistors footprints are available for additional features.  See the online configuration tool for further support. Screw connectors allow the user to connect simply and quickly the load to the HVOUT/LVOUT LDOs output voltages, the rechargeable storage element, the primary battery if used and the input signal (DC or AC).  Support is provided in the Quick Start Guide and more technical details are provided in the User Guide.
AEM30940 Evaluation Board Quick Start Guide Download
AEM30940 User Guide Download
  • EVALUATION BOARDS
Where to order
Evaluation board (79 x 46 mm) includes the AEM30940 QFN28, its 7 passive components and jumpers used to easily configure the AEM. A diode bridge is available if the source is an AC input signal. Jumpers are used to define the MPPT ratio recommended for the harvester and the protection levels recommended for the storage element. Additional jumpers and resistors footprints are available for additional features.  See the online configuration tool for further support. Screw connectors allow the user to connect simply and quickly the load to the HVOUT/LVOUT LDOs output voltages, the rechargeable storage element, the primary battery if used and the input signal (DC or AC).  Support is provided in the Quick Start Guide and more technical details are provided in the User Guide.
AEM30940 Evaluation Board Quick Start Guide Download
AEM30940 User Guide Download