Where to order
e-peas-energy-harvesting-pmic WHERE TO ORDER
Specifications:
  • Vin 120 mV to 1.5 V
  • Cold start 3 μW @ 380 mV
  • Pin 3 μW to 550 mW
  • Source Regulation Constant Voltage
  • Package QFN28 4 x 4 mm

Cold start from 250 mV input voltage and 5 μW input power (typical)

– Fast start-up from source

Constant input voltage regulation (0.12 V to 1.47 V)

  • Optimized for single /dual elements capacitive PV cell, intermittent and pulsed power sources

Ultra-low power idle modes

  • Stored energy is preserved when no source available

Shipping and shelf mode

  • Prevents energy  drain from battery when no source available (KEEP_ALIVE pin)

Configuration pins or I2C

  • Easy setup
  • Basic settings at startup with configuration pins
  • Advanced configuration with I2C

Average power monitoring

  • Easy estimation of the harvested power

Integrated thermistor conditioning circuit

  • Configurable battery thermal protection

QFN 28-pin 4x4mm

  • Small PCB footprint and low cost

Only three passive component required

Low BOM cost

AEM00900/1 Datasheet Download
AEM00900/1 Configuration Tool Download
AEM00901 Stamp Module
e-peas-energy-harvesting-pmic Where to order
The AEM00901 Stamp Module is a printed circuit board (PCB) featuring all the required components to operate the AEM00901 integrated circuit (IC) in QFN28 package. The AEM00901 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet at the exception of SRC_LVL_CFG[5], which has been tied to ground. The control and status signals are available on pads or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00901 Stamp Module is a plug and play, intuitive and efficient tool to optimize the AEM00901 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00901 features can be found in the datasheet.
AEM00901
e-peas-energy-harvesting-pmic Where to order
The AEM00901 evaluation kit (EVK) is a printed circuit board (PCB) featuring all the required components to operate the AEM00901 integrated circuit (IC) in QFN28 package. The AEM00901 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet. The control and status signals are available on standard pin headers or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00901 EVK is a plug and play, intuitive and efficient tool to optimize the AEM00901 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00901 features can be found in the datasheet.
AEM00900
e-peas-energy-harvesting-pmic Where to order
The AEM00900 evaluation kit (EVK) is a printed circuit board (PCB) featuring all the required components to operate the AEM00900 integrated circuit (IC) in QFN28 package. The AEM00900 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet. The control and status signals are available on standard pin headers or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00900 EVK is a plug and play, intuitive and efficient tool to optimize the AEM00900 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00900 features can be found in the datasheet.
AEM00900 EVK Quick Start Guide Download
AEM00901 EVK Quick Start Guide Download
AEM00901 Stamp Module Quick Start Guide Download
AEM00901 Stamp Module User Guide Download
AEM00901 User Guide Download
AEM00900 User Guide Download

  • EVALUATION BOARDS
AEM00901 Stamp Module
e-peas-energy-harvesting-pmic Where to order
The AEM00901 Stamp Module is a printed circuit board (PCB) featuring all the required components to operate the AEM00901 integrated circuit (IC) in QFN28 package. The AEM00901 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet at the exception of SRC_LVL_CFG[5], which has been tied to ground. The control and status signals are available on pads or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00901 Stamp Module is a plug and play, intuitive and efficient tool to optimize the AEM00901 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00901 features can be found in the datasheet.
AEM00901
e-peas-energy-harvesting-pmic Where to order
The AEM00901 evaluation kit (EVK) is a printed circuit board (PCB) featuring all the required components to operate the AEM00901 integrated circuit (IC) in QFN28 package. The AEM00901 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet. The control and status signals are available on standard pin headers or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00901 EVK is a plug and play, intuitive and efficient tool to optimize the AEM00901 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00901 features can be found in the datasheet.
AEM00900
e-peas-energy-harvesting-pmic Where to order
The AEM00900 evaluation kit (EVK) is a printed circuit board (PCB) featuring all the required components to operate the AEM00900 integrated circuit (IC) in QFN28 package. The AEM00900 evaluation board allows users to test the e-peas IC and analyze its performances in a laboratory-like setting or in product mock-ups. It allows easy connections to an energy harvester (e.g. a single element PV cell) and a storage element. It also provides all the configuration access to set the device in any of the modes described in the datasheet. The control and status signals are available on standard pin headers or through an I²C bus communication, allowing users to override preconfigured board settings through host MCU and evaluate the IC performances. The AEM00900 EVK is a plug and play, intuitive and efficient tool to optimize the AEM00900 configuration, allowing users to design a highly efficient subsystem for the desired target application. Component replacement and operating mode switching is convenient and easy. More detailed information about AEM00900 features can be found in the datasheet.
AEM00900 EVK Quick Start Guide Download
AEM00901 EVK Quick Start Guide Download
AEM00901 Stamp Module Quick Start Guide Download
AEM00901 Stamp Module User Guide Download
AEM00901 User Guide Download
AEM00900 User Guide Download
  • HOW IT WORKS

image

Join Us On

I am Joining!