Radio Frequency
Energy Harvesting

Do you want your device to recharge from RF energy harvesting source without the need to change a battery? Then, discover our radio frequency energy harvester working with an external matching network.

Is radio frequency energy harvesting for you?

Let’s assume you develop battery-powered loT wireless device(s) that operate in environment where they could be charged by RF transmitter

You (or you customers) need to re-place the batteries of those devices, because they run out of energy. This generates operational costs & negative impact on environment

Using dedicated emitters emitting power at 868MHz (Europe), 915MHz (USA) or 2.4GHz, your devices can be powered up

Our RF harvesting AEMs

Vin

Cold-start

Pout

MPPT

Package

Disp.

AEM30330 >>

100 mV to 4.5 V

-19 dBm

-19 dBm to 10 dBm

30mA in low power mode, 60 mA in high power mode – Selectable load voltage from 1.2V to 3.3V

QFN40
5 x 5 mm

Vin

100 mV to 4.5 V
Cold-start

-19 dBm
Pin

-19 dBm to 10 dBm
Pout

30mA in low power mode, 60 mA in high power mode – Selectable load voltage from 1.2V to 3.3V
MPPT

No
Package

QFN40
5 x 5 mm
Disp.

AEM30330 >>

AEM30300 >>

100 mV to 4.5 V

-19 dBm

-19 dBm to 10 dBm

N/A

QFN28
4 x 4 mm

Vin

100 mV to 4.5 V
Cold-start

-19 dBm
Pin

-19 dBm to 10 dBm
Pout

N/A
MPPT

No
Package

QFN28
4 x 4 mm
Disp.

AEM30300 >>

AEM30940 >>

50 mV to 5 V

-19 dBm

-19 dBm to 10 dBm

20 mA @ 1.2/1.8 V and 80 mA @ 1.8-4.1 V

QFN 28
5 x 5 mm

Vin

50 mV to 5 V
Cold-start

-19 dBm
Pin

-19 dBm to 10 dBm
Pout

20 mA @ 1.2/1.8 V and 80 mA @ 1.8-4.1 V
MPPT

No
Package

QFN 28
5 x 5 mm
Disp.

AEM30940 >>

Not recommended
for new design

Engineering samples

Available

WHERE TO ORDER

What exactly do we offer?

Best performing Ambient Energy Manager IC AEM30940 for rf power harvesting, enabling your devices to get supplied or recharged by a Radio Frequency transceiver. Dedicated support to help you define the frequency, the antenna, and the storage element size.